Synergy 5017 - 2012+ Jeep JK Exhaust Spacer Kit - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
5017
JEEP JK 2012+ EXHAUST SPACERS
GENERAL NOTES:
• These instructions are also available on our website; www.synergymfg.com.
Check the website before you begin for any updated instructions and additional
photos for your reference.
• The installation of these exhaust spacers relocates the factory crossover pipe
down and rearwards to allow for additional front drive shaft clearance.
• Installation of the spacers can be done with simple hand tools.
PARTS LIST:
1. (1) Long (Passenger side) exhaust spacer
2. (1) Short (Driver side) exhaust spacer
3. (4) Hex Head Bolt M8x1.25 – 80mm long Gr8.8
4. (4) 5/16” Gr8 flat washer
5. (1) 0.5 mL Capsule 242 Medium Strength Loctite
INSTALLATION:
1) Begin by removing the stock transfer case skid plate. Remove the 4 mounting
bolts using an 18mm socket. See picture below.