Synergy 5017 - 2012+ Jeep JK Exhaust Spacer Kit User Manual
Page 6
Advertising
7)
Once the spacers are set in place, install the M8 x 1.25 80mm long bolts provided
in the kit. Apply a small dab of medium strength loctite provided in the kit to the
threads of each bolt. Use a washer under the head of the bolt and start all bolts
finger tight.
8)
Align the exhaust so the spacers are straight before tightening. This may require
some prying of the exhaust against the frame to line everything up.
Advertising