Synergy 8069 - Jeep JK Front Track Bar Brace User Manual
Page 7
Advertising
7) Lastly, remove the track bar bolt installed in step 4. Install the track-bar and
reinstall the track bar bolt provided in the kit. (**NOTE** Wait to install track-
bar and bolt if installing 8069-02 Sector Shaft Brace as well)
a. **NOTE** On 2012 and up models retaining the stock track bar; The
9/16-12 bolt will not fit through the track bar bearing. Use the M14-2.0
bolt provided in the kit instead.
Advertising