Synergy 8080 - Jeep JK Rear Track Bar Bracket Brace User Manual
Page 2
Advertising
2) Next, jack up the vehicle and support it using jack stands. Note; suspension does not need to hang
free, the vehicle just needs to be supported to allow removal of the passenger rear tire.
3) Once vehicle is supported with the rear tire removed, fit the PPM-8080 JK rear TB brace onto the
vehicle. Begin by fitting the brace into place and aligning it with the 3.25” long 9/16” bolt provided
in the kit. Slide bolt through and start nut to hold bolt in place. DO NOT TIGHTEN.
4) Start the 2 7/16” bolts and ½” bolt as shown in the pictures below. Do not tighten yet. Simply start
bolts and nuts to align bracket.
Advertising