Synergy 8557/8558 - Dodge Steering Box Brace (94-08) - Manual (Page 5)

6) Torque 7/16-14 bolts to 60 ft-lbs. Torque the M10-1.50 frame bolts to 40 ft-lbs.
7) Lastly, install the bearing lock ring. With the set-screw loose, install and rotate onto bearing just as you
would a nut.
o The lock ring is eccentric and will engage onto the bearing at a certain point. Once the lock ring
can no longer be rotated by hand, grab a small punch and hammer to tap it into place. DO NOT
TAP HIT ON SET-SCREW HOLE!! Pound against the non threaded hole in the lock ring.
Once seated, tighten set-screw.