Synergy 8554 - 94-02 Dodge Truck Track-Bar Conversion Bracket - Manual (Page 6)

8) Now fitment of the new PPM-8554 TB Conversion Bracket can begin,
o Start by installing the tapered sleeve into the factory TB tab. Note the sleeve is installed from
the bottom with the smaller taper going towards the top.
o Next, bolt up the 8507 brkt as pictured below, align the 5/8” bolt in the brkt and start a nut on the
top of the factory TB tab. Use a washer under the nut as pictured.
o Do not tighten bolt, align brkt with steering box bolt and start the bolt removed in Step 6.
o Now, snug down both bolts to align bracket for marking and drilling cross member holes.