Synergy 8559 - Dodge Steering Box Brace (09+) User Manual
Page 3
Advertising
3) Next, position steering box brace onto sway bar as shown and swing into place. NOTE; 8557-04 shown
in this installation. Parts will differ slightly on 8558 & 8559 kits, but installation is the same. Start the
M10-1.50 bolts into the threaded holes on the frame. Use a large flat washer and lock washer under the
head of the bolt.
4) Once all 4 bolts have been started, snug them down to the point where the cross member can still be
moved to align the bearing on the cross member.
Advertising