Synergy 8561-03 - Dodge AAM 9 1/4'' 03-13 Lower Control Arm Skid Plate - Manual (Page 7)

14) Allow welds to cool. Deburr welds and paint to prevent corrosion.
15) Reinstall the control arm bolt and torque to vehicle specifications:
 14mm (9/16” bolts) – 125 ft-lbs
 16mm (5/8” bolts) – 145 ft-lbs
 18mm (3/4” bolts) – 200 ft-lbs
16) The images above show the install on the passenger side of the vehicle. Installation on the driver’s side
follows the same procedure as the passenger side.
Installation is Complete