Micropump EagleDrive ELE - Manual (Page 4)

4
DOC No: 8540 REV D
represents years of fluid handling experience and we feel it is the finest product available
of its type.
The product you have purchased was designed and constructed for use within designated
limits and conditions. Staying within performance limits and following the guidelines given
in this manual will result in excellent performance and maximum life.
Should you have a question or a problem, technical assistance is available worldwide.
Micropump products are designed for easy field servicing with service kits and technical
support available for all products.
The Purpose of this Guide...
is to provide information to enable suitably qualified technicians and fitters to install,
operate and maintain the Micropump EagleDrive and common pump/motor combinations.
Use the Guide...
when you have purchased a motor or pump/motor combination. This guide contains
specific information for installation, operation, and maintenance of the EagleDrive and
references some of the most common pump/motor combinations. This guide should
be read in conjunction with the instructions provided with your specific pump. General
information is given on installation within a system, but reference should always be made
to instructions provided with ancillary equipment when installing the unit.
Abbreviations
The following abbreviations are used in this guide:
°C Degrees Celsius °F Degrees Fahrenheit
EMC Electromagnetic Compliance DC Direct Current
LVD Low Voltage Directive
IOM Installation, Operation and Maintenance Manual
Max Maximum Min Minimum
RPM Revolutions Per Minute SELV Safety Electric Low Voltage
V Volt(s) W Watt(s)
Your Micropump Product...