Smittybilt CN1920-S4x Sure Steps - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220
Installation Instructions
Sure-Step (Part # CN1920-S4x)
01-07 Chevrolet / GMC Silverado / Sierra Crew Cab,
Including HD.
NOTE: Please read this information before installing. Check components received with components listed below. NO
DRILLING REQUIRED for installation of these SureStep side bars. To obtain correct installation, we recommend
you to follow these step by step installation instructions carefully. Please take care when installing this product to
protect the finish and your investment.
QTY DESCRIPTION
1 Sure-Step, left side
1 Sure-Step, right side
1 Front Support Bracket-left
1 Front Support Bracket-right
2 Center Support Bracket
1 Rear Support Bracket-left
1 Rear Support Bracket-right
4 3” Plastic Ring
6 12mm x 1.75 x 120mm Hex Bolt-zinc plated
10 12mm Flat washer-zinc plated
10 12mm Split Lock washer-zinc plated
4 12mm x 1.75 x 50mm Hex Bolt-zinc plated
2 8mm x 1.25 x 25mm Hex Bolt-zinc plated
2 8mm Flat washer-zinc plated
2 8mm Split washer-zinc plated
Step 1: Locate left side brackets, 12mm x 120mm Hex Bolts, 12mm Lock washers and 12mm Flat
washers. Remove front, center, and rear cab mount bolts located under the cab. Loosely attach brackets
to the bottom of the cab mounts with the hardware listed in this step (Figure 1, 2 & 3).
(On 07-09 Models you re-use the OEM body mount bolts)