Kinesis KB210USB Adjustable Ergonomic USB/PS2 Keyboard - Manual (Page 16)

16
Removing palm supports. Underside of keyboard is
shown with arrow indicating one of two locking flanges
which are pressed when removing the palm supports.
Attaching the palm supports
Warranty note concerning the removal of palm supports: Damage caused by
incorrect or careless removal of palm supports is not covered by the warranty.
Attaching the palm supports
The two halves of the keyboard must be pushed together before you attach the
palm supports. Then reinstall the palm supports, one at a time:
# Insert palm support from below into the slots provided in the keyboard.
# Slide the palm support towards the middle of the keyboard until it latches.