Kinesis KB510USB USB Contoured Ergonomic Keyboards - Manual (Page 35)

C
HAPTER
S
EVEN
: C
ARING
F
OR
Y
OUR
K
EYBOARD
A few simple precautions can help to ensure the trouble-free operation of your Kinesis
keyboard. Avoid eating or drinking over your keyboard.
Cleaning
Clean your keyboard’s exterior surfaces on a regular basis. First, always unplug your Kinesis
keyboard before cleaning it. To remove dirt marks and residue that accumulate during normal
use, wipe the keyboard with a soft cloth that has been dampened with water or rubbing alcohol
(70% isopropanol). Avoid applying alcohol to keyboard labels.
If you use palm pads and notice any adhesive buildup when you remove them for replacement,
wipe the palm rests with a soft cloth that has been dampened with rubbing alcohol.
Accidental spills
If you spill any type of liquid onto your Kinesis keyboard, unplug the keyboard immediately
to reduce the likelihood of electrical damage. Do not use the keyboard until it has dried
completely.
If you spill water on your Kinesis keyboard, tilt the keyboard so that the liquid can drain.
Avoid getting the function keys wet in the process. Shake the keyboard vigorously to remove
liquid trapped inside the switches. Air dry the keyboard at room temperature at least overnight
(preferably for several days). If the keyboard does not operate after it has dried completely,
please contact Kinesis Technical Support.
A sticky spill will require professional servicing. Contact Kinesis Corporation for instructions
on returning your keyboard for servicing (see C
HAPTER SIX
: T
ROUBLE
S
HOOTING
, T
ECHNICAL
S
UPPORT
, A
CCESSORIES
, U
PGRADES
,
AND
R
EPAIRS
).
Defective switches
If a particular key frequently produces multiple characters, it can be fixed (at least
temporarily) by removing the keycap (use the provided keycap puller) and spraying an
electronic-grade contact cleaner into the switch. Be careful when removing keycaps to pull it
straight off to avoid causing permanent mechanical damage to the internal switch mechanism.
If the problem persists, contact Kinesis technical support.
35