Addictive Desert Designs 2009 - 2013 F-150 Series LED Light Strip User Manual
Page 3
5. Route ground wire behind dash and attach to the 13 mm dash bolt.
6. Re-assemble interior.
7. Locate a suitable location and remove the backing from the light strips and attach to the inside
of the side steps. Take into consideration the location of the harness prior to adhering.
8. Back under the truck, there will be one short end and a long end of the harness. The short end
will be attached to the passenger side Led Light Strip. The long end will be routed through the
transmission crossmember across to the driver’s side of the truck.
**Note the hose clips pictured below are not included in the kit and can be purchased from most
hardware stores locally**
9. Once the wires are ran and secured to the vehicle, using the supplied wire ties, crimp the wires
from the harness to the LED Strips by matching colored wire. (ie red to red, black to black)