Snorkel PUSH 6 ECO - Manual (Page 4)

Page 3 of 23 Pop-Up PUSH 6 ECO Operator’s Safety and Maintenance Handbook (v.0.4.0409)
Section 1
DESCRIPTION
Introduction
This handbook provides information on the safe operation of this work platform.
Operators should read and understand all of the information contained within this
manual prior to operating the work platform.
An abridged set of instructions in the form of a training card and a training sticker
can also be found attached to the POP-UP PUSH 6 ECO PUSH 6 ECO at the con-
trol pendant and toe board respectively.
The handbook contains several warnings, these indicate situations which if not
avoided could result in serious injury or death to persons, or damage to the ma-
chine or property.
Additional copies of this handbook are available from the manufacturer at the ad-
dress below. Information contained in this handbook is based on the latest product
information at time of publication.
POP-UP PUSH 6 ECO Products Ltd operate a policy of continuous improvement
and therefore reserve the right to make product changes at any time without obliga-
tion.
Description
The POP-UP PUSH 6 ECO PUSH 6 ECO is a scissor lift type work platform, which
is manoeuvred manually into work positions and elevated and lowered using an
electro-hydraulic control system.
The standard machine includes the following standard features:
• 240kg safe working load • Steerable wheels
• 3.63 metre working height • Brakes on two wheels
• 1.65 metre stowed height • Battery powered with
• Easily manoeuvrable built-in battery charger
• Weighs just 225kg • Emergency lowering facility
• Pass through standard doors • Easily transportable
• Simple operation • Low maintenance
• Steel guard rails • Complies with EN280:2001
• Non-slip platform
Intended use
The machine has been designed to comply with the safety requirements of the
Machinery Directive 98/37/EC taking guidance from the European Standard
EN280:2001 Mobile Elevating Work Platforms.
The machine is intended to be used to lift persons, plus essential tools and
materials, to enable work to be undertaken at height. Typical applications will
include maintenance, cleaning, painting, etc. at varying heights above ground level.
WARNING
THE MACHINE MUST NOT BE USED IN APPLICATIONS OR FOR USES
OUTSIDE OF THE SCOPE OF THIS HANDBOOK. SHOULD A CERTAIN
APPLICATION NOT BE COVERED, THEN THE MANUFACTURER SHOULD BE
CONTACTED