BT PaperJet 55E - Manual (Page 24)

24
To edit or delete a speed dial entry
Follow the steps shown above to store a
speed dial entry. A new name and number
will overwrite the existing entry.
To edit an entry , press buttons to move
the cursor over the digit or character you
want to change and enter the correct one.
To delete a name or number, press the
Clear button when the name or number is
displayed during these steps.
To send a speed dial fax
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Press the speed dial button. Display shows
FAX CALL
CODE OR < >
Enter the memory location number under
which the fax number is stored. The number
is dialled.
Or
Press to scroll through fax numbers until
the one you want is displayed.
And
The number is dialled.
01-32
Press to switch between FAX or TEL NUMBER.
Press to select the fax or phone number
setting you want.
Display shows 1: FAX or TEL NUMBER.
Enter the number you want to store.
If necessary, press the < > buttons to move
the cursor.
Press to confirm. Display shows 1: NAME
Enter the name you want to store.
Press buttons to move the cursor.
Press to confirm. Display shows EDIT
ANOTHER? YES
If you stored a fax number you can now add
a phone number to the memory or vice
versa. You can also create a new memory
entry.
To return to standby
Or
Press to enter another name or number.
Repeat the procedure above to enter names
and numbers.
Press to confirm your last entry.
Press to return to standby. Your entries
have been stored.
A-Z
/