Error codes – BT PaperJet 55E User Manual

Page 41

Advertising
background image

41

Error codes

Other problems may be accompanied by a display of ERROR CODE and a number. Check the number against
the list below.

CODE

MESSAGE

ERROR CAUSE

ACTION

OK

No message. Operation completed

No action.

successfully

02

IMPOSSIBLE CONNECTION

The fax machine does not detect any

Check that the fax machine is

dialing tone or receives an irregular signal.

correctly connected to the telephone
line and that the hardset is not off
the hook. Then try connecting again.

03

RECEIVER DOES NOT ANSWER

The number you are calling does not

Check for dial tone by lifting the

answer or is not a fax or there is no

handset and if OK try calling again.

dial tone.

04

ERR.WHILE TRANSMITTING

A problem has occurred while

Send again starting from the

RESEND FROM PAGE: nn

sending a fax. “nn” = page number

page shown in the report.

on the which the error occurred.

05

RESEND PAGES:

The machine you are calling

Send again starting from the page

nn, nn

detected errors during the send.

shown in the report.

“nn” = page number on which
the error occurred.

07

DOCUMENT TOO LONG or

Transmission time for a page exceeds

Try sending again.

SENDING STOPPED

the permitted limit.

08

CHECK THE DOCUMENT

Optical scanner unable to read

Remove and re-insert document in

the document or document may be

the feeder and try again.

too long.

Check paper is not longer than
360mm (US Legal Length).

09

STOP PRESSED

You have stopped the machine.

No action.

10

No message

Fax has detected an error while

Ask sender to send fax again.

receiving a fax.

11

No message

Printer problem while receiving a fax.

Correct the printing problem, then

Document stored in the memory

wait for the stored document to be

but the memory capacity has been

printed. Ask sender to fax the rest

exceeded.

of the document.

13

ERRORS WHILE POLLING

Polled fax machine has no document

Contact the sender.

ready or was not set for polling.

16

POWER FAILURE ON PAGE

Power failure while sending or

Send again from the page shown on

receiving a document.

the report.

(OK)

No message.

Document has been received but

Contact sender.

printing quality is poor.

OCC

LINE BUSY

The line is engaged.

Try again later.

Advertising
This manual is related to the following products: