Advance Adapters 712588 - Manual

ADVANCE ADAPTERS INC. P/N: 712588
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 5
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-06-05
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals
are normally available at automotive dealerships and parts stores.
KIT NO. 712588-A CONSISTS OF:
No. Qty. Part No. Description
1. 1 712588-PLT ADAPTER PLATE - (Pre-assembled)
2. 1 712588-D PLASTIC DUST COVER
3. 1 712588-R TORQUE CONVERTER ADAPTER RING
4. 1 712588-E FLEXPLATE, YRS. 1968-1980
5. 2 716123 GM DOWEL PINS (Installed)
6. 3 720015 WASHER FOR 3/8" TORQUE CONVERTER BOLTS
7. 7 720049 TORQUE CONVERTER BOLTS
8. 3 723758 3/8 TORQUE CONVERTER BOLTS
9. 5 723764 STUD BOLTS, 3/8"-24 x 1.656" (Pre-assembled)
10. 6 724322 F.H.C.S. 7/16"-14 x 1-1/4"
11. 5 302071 FLANGED NUT 3/8"-24
KIT NO. 712588-B CONSISTS OF:
No. Qty. Part No. Description
1. 1 712588-PLT ADAPTER PLATE - (Pre-assembled)
2. 1 712588-D PLASTIC DUST COVER
3. 1 712588-R TORQUE CONVERTER ADAPTER RING
4. 1 712588-F FLEXPLATE,
YRS. 1982-1997
5. 2 716123 GM DOWEL PINS (Installed)
6. 3 720015 WASHER FOR 3/8" TORQUE CONVERTER BOLTS
7. 7 720049 TORQUE CONVERTER BOLTS
8. 3 723758 3/8 TORQUE CONVERTER BOLTS
9. 5 723764 STUD BOLTS, 3/8"-24 x 1.656" (Pre-assembled)
10. 6 724322 F.H.C.S. 7/16"-14 x 1-1/4"
11. 5 302071 FLANGED NUT 3/8"-24
KIT NO. 712588-C CONSISTS OF:
No. Qty. Part No. Description
1. 1 712588-PLT ADAPTER PLATE - (Pre-assembled)
2. 1 712588-D PLASTIC DUST COVER
3. 1 712588-R TORQUE CONVERTER ADAPTER RING
4. 1 712588-G FLEXPLATE, YRS. 1981
5. 2 716123 GM DOWEL PINS (Installed)
6. 3 720015 WASHER FOR 3/8" TORQUE CONVERTER BOLTS
7. 7 720049 TORQUE CONVERTER BOLTS
8. 3 723758 3/8 TORQUE CONVERTER BOLTS
9. 5 723764 STUD BOLTS, 3/8"-24 x 1.656" (Pre-assembled)
10. 6 724322 F.H.C.S. 7/16"-14 x 1-1/4"
11. 5 302071 FLANGED NUT 3/8"-24
FORD SMALL BLOCK 302 TO
CHEVY AUTOMATIC TRANSMISSIONS
CAUTION: When assembling this
kit and have it completely bolted
together, you must be able to pull
the torque converter assembly
forward towards the engine at
least 1/16" to 1/8". This prevents
any possible damage to the trans-
mission pump. If this cannot be
obtained, please call our techni-
cal department for help. The bolts
in the kits for the torque con-
verter are both metric and stan-
dard, please identify and use the
proper bolts for your torque con-
verter.