Basic settings – Blaupunkt NEW YORK 800 User Manual

Page 19

Advertising
background image

19

Basic settings

Basic settings

In the settings menu of the device, you can adjust
the basic settings for the diff erent functions of the
New York 800 to your requirements.

u In the main menu, press the Settings button.

The settings menu is displayed, the General sub-
menu is activated.

u Call up the submenus with the buttons in the lower

area of the settings menu.

Video

The following settings are possible:

Aspect ratio – Adjust image format

Rear view camera – Adjust back-up camera (if a back-up
camera is connected)

DivX registration code – Display of the DivX® registra-
tion code

General

The following settings are possible:

Radio region – Select the reception region for the radio
reception.

Background light off – If this value is set, the display of
the radio is completely switched off after 10 or 20 sec.
without use.

Dimmer mode – Adjust the display brightness

Beep – Switch confi rmation beep on/off

Wallpaper – Select the wallpaper for menus. Various mo-
tifs can be selected in the device. You can also select your
own images which you previously stored on the MicroSD
card.

Calibration – The touchscreen can be calibrated here.

SWC – The buttons of a connected steering wheel con-
trol can be confi gured here.

Load factory – Resets all personalised settings.

Time

The following settings are possible:

Date – Set the date

Clock mode – Selection between 12 and 24-h mode

Time – Set the time

Advertising