Blaupunkt NEW YORK 800 - Manual (Page 7)

7
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
u In radio mode, press the [ ] button.
A numeric keypad is displayed for the frequency
input.
u Enter the frequency of the desired station with the
numeric keypad.
u Press the [
] button.
The radio menu is displayed, the station of the
frequency entered is played back.
Starting station seek tuning
u Press the [ ] or [ ] button for approx. 2 seconds
to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM waveband,
only traffi
c information stations are tuned into if the
priority for traffi c information is switched on.
Storing stations manually
u Select the desired memory bank with the [ ] but-
ton.
u Set the desired station.
u Press the [
] button.
The menu for storing stations is displayed. 6 memory
locations are available that are displayed as buttons.
u Press the button under which you want to store the
current station.
The station is stored, the radio menu is displayed
again.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store the 6 FM stations off ering the strongest reception
in the region in the memory bank FM1, FM2 or FM3.
u Select an FM memory bank.
u In the radio menu, press the [ ] button.
u In the options menu, press the Travelstore button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory bank.
Note:
With switched-on priority for traffi
c information, only
traffi c information stations are stored.
Switching RDS on/off
Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.
u In the radio menu, press the [ ] button.
u The options menu is displayed, the current setting is
shown after RDS.
u In the options menu, press the RDS button to change
the setting.
u Press the [ ] button.
The radio menu is displayed again.
Traffi c information
In the reception region Europe, an FM station can iden-
tify traffi
c announcements via an RDS signal. If priority for
traffi c reports is switched on, a traffi c report is automati-
cally switched through, even if the car sound system is
currently not in radio mode.
Note:
The volume is increased for the duration of the
switched-through traffi
c announcement. You can ad-
just the minimum volume for traffi c announcements.
Switching priority for traffi c announcements on/off
u In the radio menu, press the TA button to switch the
priority for traffi c announcements on or off .
The TA button is lit if the priority for traffi c announce-
ments is switched on.
Setting the minimum volume for traffi c
announcements
u In the radio menu, press the [ ] button.
u In the options menu, press the TA VOL button.
u Adjust the desired volume with the [ ] or [ ] but-
ton.
u Press the [ ] button.
The radio menu is displayed again, the set volume
is stored.
Radio mode