Eppendorf Temperature Verification System - Manual (Page 16)

Temperature Verification System USB – Single-channel — Operating manual
16
4.5 Connecting the Mastercycler ep
1. Use the temperature sensor connecting cable to connect the grip to the Measuring device.
2. Switch on the Measuring device.
3. Check the rechargeable battery capacity.
4. Charge the rechargeable battery or use the mains/power supply device if the battery capacity
is low.
4.6 Connecting the Mastercycler pro 384 and Mastercycler ep 384
4.6.1 Connecting the Mastercycler pro 384
1. Use the temperature sensor connecting cable to connect the grip and the Measuring device.
2. Connect the Temperature Verification System USB – Single-channel to the Mastercycler pro
384 control panel.
3. Switch on the Measuring device.
4. Check the rechargeable battery capacity.
5. Charge the rechargeable battery or use the mains/power supply device if the battery capacity
is low.
4.6.2 Connecting the Mastercycler ep 384
1. Use the temperature sensor connecting cable to connect the grip and the Measuring device.
2. Switch on the Measuring device.
3. Check the rechargeable battery capacity.
4. Charge the rechargeable battery or use the mains/power supply device if the battery capacity
is low.
The Mastercycler ep 384 will not be connected to the Temperature Verification System USB –
Single-channel.
Hint!
The Mastercycler ep control panel (5340) can only be used for manual
verification and adjustment. A direct cable connection cannot be established
between the measuring device and thermal cycler.