Eppendorf New Brunswick -86 °C Freezers G - Manual (Page 10)

HEF® and G -86 °C Freezers — Operating manual
10
Abb. 2: Chest freezer - Front view
Fig. 2: Chest freezer - Front view
3.2 Delivery package
3.2.1 Inspection of boxes
Inspect the boxes carefully for any damage that may have occurred during shipping. Report any
damage to the carrier and to your local New Brunswick Sales Order Department immediately.
3.2.2 Packing list verification
Unpack your order, saving the packing materials for possible future use. Save the operating
manual for instruction and reference. Verify against your New Brunswick packing list that you
have received the correct materials, and that nothing is missing. If any part of your order was
damaged during shipping, is missing, or fails to operate, fill out the "Customer Feedback" form,
available online at www.nbsc.com/CustomerFeedback.aspx.
1 Heated vent port (inside compressor housing) 2 Lockable handle
3 Control panel/display 4 Battery switch (alarm) behind lockable panel
5 On/Off circuit breaker behind lockable panel 6 Chart recorder (optional)
7 Quarter turn fasteners 8 Air filter grille
9 Braked castors (front)
2 3
1
7
8
4
5
6
9
NOTICE!
Risk of material damage
 Vacuum insulation panels are used in the construction of Innova U725G and U410 HEF,
U570 HEF, and C660 HEF model freezers. Inspect the cabinet panels for punctures or other
damage that compromises the integrity of the product.
 These panels are mounted in the cavity against the steel outer wall of the freezer. Any drilling
or puncture to the outer wall could release the vacuum from the panel, resulting in impaired
freezer performance.
 Any unauthorized punctures or other damage deliberately made to the cabinet walls will
invalidate the warranty.
3
Product descriptio
n