Eppendorf New Brunswick -86 °C Freezers G - Manual (Page 32)

HEF® and G -86 °C Freezers — Operating manual
32
7.2.5 Removing the inner doors (U725-G)
To remove the inner doors of the U725-G freezer:
1. Fully open the outer door of the Freezer.
2. Fully open the inner door.
3. Lift off inner door from hinges and set aside.
Abb. 11: Lift-off inner door
Fig. 11: Lift-off inner door
Repeat procedure for each door.
7.2.6 Replacing the inner door (U725-G)
To replace the inner door of the U725-G freezer:
1. Fully open the outer door of the freezer.
2. Fit door to hinge pins and close.
3. Check to ensure that inner door gasket is sealing against the freezer trim.
4. If required, adjust the latch retainer by loosening the screws and moving forward or
backwards.
5. Close outer door.
1 Inner door 2 Lift-off hinge
1 2
7
Maintenance