JLG M400 Operator Manual - Manual (Page 43)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121644 – JLG Lift – 3-9
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
8. Telescope Control
The TELESCOPE control switch affords extension
and retraction of the main boom when posi-
tioned to IN or OUT.
9. Lights (If Equipped)
This switch operates control console panel
lights and head lights if the machine is so
equipped.
10. Jib (If Equipped)
Push forward to lift up, pull back to lift down.
Variable lift speed is using the Function
Speed Control.
11. Soft Touch Override Switch (If equipped)
This switch enables the functions that
were cut out by the Soft Touch system to
operate again at creep speed, allowing the operator to move
the platform away from the obstacle that caused the shut-
down situation.
12. Jib Swing
Push toggle switch right to swing right, push
left to swing left.
13. Lower Boom Lift
Provides for raising and lowering of Lower
and Mid Boom when positioned to UP or
DOWN. Upper lift will not function when
operating lower lift.