JLG 1850SJ Operator Manual - Manual (Page 59)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121618 – JLG Lift – 3-15
UPON ACTIVATING THE JIB STOW CONTROL SWITCH, A SLIGHT DELAY WILL BE EXPE-
RIENCED BEFORE THE JIB WILL BEGIN TO MOVE.
17. Jib Stow
Allows the jib to be returned to the stowed
position for transport and also taken out of
the transport position for machine usage.
This control operates both jib swing and the
jib lock pin in a coordinated manner.
NOTE: The Jib Telescope function only operates in the 500 lb. (227 kg for
ANSI markets and 230 kg for CE and Australia markets) capacity
mode.
18. Jib Telescope
Provides extension and retraction of the jib.
19. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is
against an object. All controls are cut
out until the override button is pushed, at which time con-
trols are active in the Creep Mode.
20. Platform Rotate
Allows the operator to rotate the platform to
the left or right.
21. Lock Pin Indicator
When illuminated, indicates the jib is
centered and the jib lock pin is
engaged. When blinking, indicates the
jib is in the process of being stowed or centered. The indica-
tor is off when the lock pin is disengaged and the jib is
stowed (machine in transport position).