JLG 1350SJP Service Manual - Manual (Page 268)

SECTION 4 - BOOM & PLATFORM
4-34 – JLG Lift – 3121142
21. Push the outer mid assembly into the inner mid while
pulling the boom cables out the back fo the inner mid
section at the same time. Leave 3 to 4 feet of the outer
mid section sticking out of the inner mid section.
22. Push the retract cable ends into the mounting recepta-
cles and install the cable sheaves and adjustment nuts.
23. Push the outer mid assembly almost completely into the
inner mid boom section.
24. Install the cable retainer blocks over the fly boom retract
cables and insert the fly boom extend cable into the
mounting receptacles.