JLG 4394RT Service Manual User Manual
Page 59
Advertising
SECTION 3 - CHASSIS & SCISSOR ARMS
3121133
– JLG Sizzor –
3-23
22. Check splines (1) for damage or fretting; running
surfaces (2);groove cut by shaft seal (3).
23. Check that sliding surface is free of grooves (1);
cups are free of groove and there are no pittings (2).
24. Make sure the seat of the shaft seal in the case has
no damage.
25. Make sure the sealing surfaces are damage free.
26. Press bearing ring in port plate (with tool).
27. Press bearing ring in supporting axle (with tool).
1
2
3
1
2
Advertising
This manual is related to the following products: