Brother DCP-1400 - Manual (Page 20)

1 - 4 G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R / P R I N T E R
Inserting Originals for Copying
You can copy from either the ADF (Automatic Document Feeder) or from the
scanner glass.
Using the ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 50 pages, feeding each
one individually through the machine. Use standard (20 lb/75g/m2) paper when
using the ADF. Always fan the pages well and stagger them.
Temperature: 68°F – 86°F (20°C – 30°C)
Humidity: 50% – 70%
Paper: Xerox 4200 (20LB/LTR),
Xerox 4024 (24LB/LTR)
■
Make sure originals written with ink are completely dry.
■
Originals must be from 5.8 to
8.5 inches wide, and from 5 to
14 inches long.
1 Insert original face up, top
edge first.
2 Adjust the paper guides to fit
the width of your pages.
3 Stagger multiple pages. Then
place them in the ADF, until
you feel the first page lightly
touch the feed roller.
4 Pull up the document stopper.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric. (To
copy or scan this kind of document, see
Using the Scanner Glass , page 1-5.)
Document
Stopper
Original
is Face Up
in the ADF
Stagger the Pages