Brother DCP-1400 - Manual (Page 45)

M A K I N G C O P I E S 5 - 9
Changing Default Copy Settings
Press Menu/Set, 2 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu/Set. Adjust the
Copy Mode and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press or to scroll through the options for each setting. Press
Menu/Set to save your selection. Press Stop—OR—Press to select the
next setting you want to change.
Press Menu/Set, and 2.
Copy Mode (Type of Original)
You can select the Copy Mode for your type of original. The default setting is
AUTO , which is used for originals that contain both text and photographs. TEXT
is used for originals containing only text. PHOTO is used for copying photographs.
1
Press Menu/Set, 2, 1.
2
Press or to choose the type of
original ( AUTO , TEXT or PHOTO ), and
then press Menu/Set.
3
Press Stop.
TEXT
1.COPY MODE
2.CONTRAST - +
is default
AUTO
PHOTO
PLAIN
THICK
THICKER
3.PAPER TYPE THIN
1.COPY MODE