I.R.I.S. IRISPen Translator 6 - Manual (Page 39)

C HAPTER 3 - B ASIC SETTINGS
35
actually paste the data.
Select this option if you want to manually paste the read data into
your target application.
! Remember that the clipboard can only contain the data of the last
scan.
Active application
This option is selected by default. The recognized data will be
directly inserted at the cursor position in the target application.
Paste mode
If you select Paste mode, the recognized data is first sent to the
clipboard, then automatically inserted at the cursor position in the
target application. This operation is totally transparent for the user.
You should not normally use this option. However, if you notice that
the characters inserted in the target application do not correspond to
the ones actually recognized by the software (see: Starting up, The
Scan Test window), enable it.
Translator PromtX
The option Translator PromtX is used to make the application
send the recognized data to the translation software, Translator
PromtX, and have it translated for you. The translation is carried
out according to the language chosen in the IRISPen Application
window. The translated text will be directly displayed in the
PromtX translation window.