I.R.I.S. IRISPen Translator 6 - Manual (Page 45)

C HAPTER 4 - F REQUENT COMMANDS
41
software and represented by the "~" symbol in the Scan Test
window.
The best to do if you encounter such a situation is to make the
software ignore the first and last position characters for the
output, otherwise you will have to delete them manually once
inserted in the active application.
• In the Output tab, select the options according to your needs:
Restore paragraph:
You must indicate how to interpret hyphens occurring at the end
of a line. If you scan the lines "The new presi-" and "dent waved
from the balcony", the hyphen must obviously be dropped so as
to recompose the word "president" in the output: "The new
president waved from the balcony".
Select this option in order to delete all the end hyphens occurring
in your text.
Note: If hyphens are deleted, the ending codes (see below) will
automatically be deleted so that the words can be properly
recomposed.
Add starting code:
You can have the IRISPen execute operations automatically in
the target application before the output result is being inserted.
You can for example have the software operate a carriage return
before it inserts any read line. A series of possible codes are
proposed by default, but you can also introduce your own
starting code.
To insert a starting code, select a code from the drop-down list or
select Custom to introduce our own code, then click OK to
confirm. With the Custom code, you can add any combination
of keyboard commands and/or characters.