I.R.I.S. RISCard Anywhere - Manual (Page 13)

Using the scanner 10
Step 5: Making a scan
1. With the side to be scanned facing upward
and in the correct orientation as indicated
by the orientation mark, place one edge of
the original on the scanner and adjust the
paper guide so that the original is aligned
with the left side of the feeding slot.
Insert the original into the feeding slot.
WARNING : Do not scan glossy
photos in humid environments
(humidity higher than 70% RH).
Otherwise the surface of the photo
will become sticky and cause the
scanner to jam.
2. The original will be fed into the slot and
scanned automatically. The Power
indicator blinks while scanning.
NOTE : See More information on
page 15 for how to insert photos and
other types of originals.
3. When the scanning is complete, the Status
indicator will keep blinking for a while,
indicating that the scanner is processing the
image and storing the file.
Wait until the Status indicator stops
blinking before inserting the next original.
WARNING :
Insert only one sheet at a time. Insert the
next original only when the previous one is
done. Otherwise the scanner will fail to
function normally.
Align left