BURY UNI Take&Talk universal - Manual (Page 4)

2
Introductory information
1. General
Dear customer,
Congratulations on purchasing a BURY telephone holder for cellular phones. You have chosen a high
quality product that is extremely easy to use. Please read the installation manual carefully so that you
can fully enjoy your BURY product.
If you have any further questions concerning installation or operation of this device, please contact your
dealer. He will be happy to give you reliable advice. You can also contact our hotline. Our phone and fax
numbers are listed in the chapter Service.
Have a good trip!
2. Security guidelines
Power supply
The power usage of the cradle has been designed for the use in vehicles
with an on-board supply system of 12 volts (passenger car). If you intend
to install the device in a vehicle with an on-board supply system
of 24 volts (lorry), please use a voltage converter. If you have queries
regarding this subject, please contact our hotline.
Position
Install the cradle in the vehicle so that your field of vision is not impaired
and the components are not mounted in the impact zone of the passen-
ger compartment or in the airbag inflation zones. Very important: please
observe the car manufacturer’s information (operating manual) as re-
gards “accessories”. If in doubt, please contact a specialist workshop to
get information on the correct position for installation in the vehicle.
Intended use
We shall not be liable for damages or malfunctions due to improper use
of the hands-free system. Therefore, do not expose the device to mois-
ture, extreme temperatures or shocks and follow the procedure de-
scribed in the installation manual carefully.