BURY UNI Take&Talk universal - Manual (Page 8)

6
Installation of the system
4. Installation of the system
Important:
When positioning the cradle please take care that the device does not impair the view X
onto the road, that it will not be installed in the impact zone of the passenger compart-
ment (amongst others in the airbag inflation zones) and that the cable may be laid without
any problems.
Please avoid direct sunlight on the device or high internal temperatures, which can be X
rapidly reached in parked vehicles. In such cases, remove the cradle and put it in the car
glove pocket or glove box for instance.
Step 1:
Adjusting corner fasteners to wide ranging models of mobile phone
To be able to select the suitable type of corner fastener for a certain
model of mobile phone / smartphone, please familiarize yourself with
the corresponding compatibility list. This list is available on our internet
site in the download area for the product at www.bury.com.
Important:
Every corner fastener set is equipped with a letter nota- X
tion which is positioned on the interior side of the corner
fastener.
1. Turn the corner fastener with the rotary knob (1) in a clockwise
direction.
2. Detach the corner fastener in the direction of the arrow (2).
3. Fit the correct ending for the corner fastener and tighten it by
turning it anticlockwise.
4. Repeat the above steps with the remaining three corner fasteners.
1
2