BURY Motion Universal - Manual (Page 15)

15
10. Establishing a Bluetooth connection
If you wish to establish a Bluetooth connection between your mobile and the HFCK for the first time,
you have to activate the Bluetooth function of your mobile phone and search for Bluetooth devices. In
this case, search for a device labelled „BMU…“. If several devices were identified, please select the
BMU and enter the PIN number „1234“. The
Bluetooth connection (pairing) will then be established
between your mobile phone and the HFCK. Next, press down on the ‚Pair‘ button in order to create the
connection with the HFCK.
In addition it is possible that you must delete all devices connected to your mobile phone first in
order to enable a correct identification of the HFCK and the establishment of a connection.
Note:
If the rechargeable battery of the mobile phone is low, it is sometimes not possible to X
establish a
Bluetooth connection.
The HFCK has a memory for the storage of the identification of up to 8 mobile phones. In case
a ninth mobile phone is connected, the oldest entry in the HFCK memory will be cancelled.
The Bluetooth connection is interrupted if you deactivate the Bluetooth function on your mobile
phone or you interrupt the supply of power to the BURY Motion Universal. In addition, the con-
nection is disconnected, if you move too far away from the vehicle while taking your mobile
phone with you and thus leave the reception radius of the HFCK.
Please note that the capacity of your mobile phone‘s storage battery can quickly decrease when
the
Bluetooth function is active. If you do not want to use the Bluetooth function anymore, e.g. if
you leave the vehicle for a longer period, it is recommended to deactivate this function.
Note:
This function is only available if the multipoint function has been activated. X
Thanks to the Multipoint function, you can connect two mobile telephones simultaneously to BMU via
Bluetooth. You can operate this function with the home button. The phone which is connected first
gets priority, this means that only its phone books, call lists and voice tags are uploaded and can be
retrieved from the HFCK memory.
This is the same situation as if only one mobile phone was connected to the HFCK. However, if the
secondary mobile receives a call then this call is also taken via the HFCK.
When the BURY Motion Universal is switched on, the device connects with the mobile phone which was
connected last. The prerequisite for this is that it is located in the vehicle, that the
Bluetooth function
is activated and the connection identification to the HFCK is not deleted.
If both mobile phones happen to receive a call at the same time then the primary phone will get prior-
ity. The incoming call on the other mobile will be displayed to you after the first call has been answered
or rejected. Then the first call can be ended quickly and then the second can also be rejected (both of