BURY Motion Universal - Manual (Page 16)

16
Operating guidelines
these steps are taken by pressing the end button) or the first call can be ended and the second call
answered (by pressing the call button).
It is not possible to put the first caller on hold because both callers did not phone the same number.
Should another phone ring during the call then the incoming call can be rejected by pressing the end
button on the phone.
Note:
For some mobile combinations, in multipoint mode, it can be the case that the voice out- X
put during an active phone call is no longer emitted via the BMU if you accept an incoming
call on the second phone using the phone itself.
Completely functional call management can only be guaranteed by using the BMU con- X
trol panels.
11. Functional action button features
On the back side of the BURY Motion Universal there is a function key (action button) that is designed
to perform all major operations of the device. After connecting the BMU to the power supply for the
first time, press and hold the action button for about 5 seconds until you hear a sound, after which the
device will offer the languages that are available for you to choose (English, German, French, and
Spanish). Briefly press the function key to select the language that you have chosen. The characteri-
stics of the remaining functions of the action button are described below.
When the device is turned on but not connected to the phone:
- press the action button longer to enable or disable the multipoint function, which allows you to con-
nect two mobile phones
- press the action button briefly to enable or disable the autoconnect feature of the paired phone (or
two)
When the device is turned on and connected to one or two phones:
- press the function button longer to disconnect your phone(s) from the device
- press the function key briefly to activate the Voice Tag option of the phone (if included)
In the case of an incoming call:
- press the button briefly to receive an incoming call
- press the button longer to reject an incoming call
In the case of an active call (the conversation):
- press the action key shortly to end an active call (disconnects the caller)
Restore factory settings:
- press and hold the function button and plug-in the power supply simultaneously. Release it when you
hear a sound indicating that the device was restarted and the language selection will start over