Safety instructions – IOGear GCL1816KITU User Manual
Page 70
70
71
General
Please read all of these instructions and save them for future reference.
•
Carefully follow all warning and instructions marked on the device.
•
Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious
•
damage may result.
Do not use the device near water.
•
Do not place the device near or over any radiator, heat register or other heat source.
•
The device cabinet is equipped with ventilation openings to ensure that the device remains adequately
•
ventilated and does not overheat. These openings must never be blocked or covered.
The device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block the
•
ventilation openings. Additionally, the device should not be placed inside another enclosure (bookcase,
etc.) unless adequate ventilation is provided.
Do not place any liquids on top of the device and take all precautions to avoid spilling any liquids on
•
the device.
Unplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use only
•
a lightly dampened cloth for cleaning.
The device should only be operated from the type of power source indicated on the label. If you are
•
not sure what type of power is available, consult your dealer or local power company.
The device is designed for IT power distribution systems with 110V and 230V phase-to phase voltage.
•
Safety Instructions