IOGear GCL1816KITU - Manual (Page 68)

J17
68 69
This restore will change all settings back to default. This will also have administrator and all user accounts
removed from the LCD KVM. All port names and setting will also be removed. In other words, everything
will be changed as if it is a brand new unit.
Restore Factory Default Settings
Step 1
Turn off the power by using
the power switch located in
the back of the LCD KVM.
Step 2
Unplug the power cord from
the power socket of the LCD
KVM.
Step 3
Remove the rear top housing
from the LCD KVM.
Step 4
Using a jumper cap, short the jumper on the main board labeled J17.