IOGear GCL1816KITU - Manual (Page 39)

Port ID Display Mode
This function allow you to choose the way you
want to show the ports in the OSD main screen –
port number only, port name only or both. Simply
move the red highlight bar to the option that you
like to use and press [Enter]. Then, press [Esc] to
exit from this function. Scan Duration
This function allows you to set the autoscan time
interval between 0 second to 255 seconds (5
second is set by default). Simply enter the number
between 0-225 and press [Enter].
38 39