Echo 71854 - Manual (Page 4)

PTO CHIPPERS 2
Table oF conTenTs
descriPTion Page descriPTion Page
saFeTY ......................................................................... 3
1.1 SafeTy SyMBOl....................................................... 3
1.2 BefOre OPeraTiNg .............................................. 3
1.2 BefOre OPeraTiNg (cONT.) ............................... 4
1.3 OPeraTiON SafeTy .............................................. 4
1.4 PTO SafeTy ............................................................ 4
1.5 feed rOller SafeTy .......................................... 5
1.6 MaiNTeNaNce/STOrage SafeTy ....................... 5
1.7 SafeTy decal lOcaTiONS ................................. 6
1.8 SafeTy decalS ..................................................... 7
assemblY .................................................................... 8
2.1 aTTach chiPPer chuTe aNd exTeNSiON Tray 8
2.1 aTTach chiPPer chuTe (cONT.) ........................ 9
2.2 SafeTy Bar (72854S) ............................................ 9
2.3 hydrOSTaTic cONTrOl caBle .......................... 9
2.4 aTTach diScharge TuBe (71854, 72854, 71854S,
72854S) 9
2.4 aTTach diScharge TuBe (cONT.) .................... 10
2.5 aTTach diScharge TuBe (76854) .................... 10
2.6 cONNecT PTO ShafT.......................................... 10
conTrols & oPeraTion ........................................ 11
3.1 cONTrOlS ..............................................................11
3.2 OPeraTiON ............................................................ 12
HYdraulic Feed ...................................................... 13
4.1 hydraulic feed iNSTrucTiONS ..................... 13
4.2 cONTrOl arM OPeraTiON ................................ 13
4.3 hydraulic feed MaiNTeNaNce ...................... 14
4.4 SafeTy Bar (72854S) .......................................... 14
elecTronic Feed sensor
sTandard on 76854 ................................................ 15
5.1 iNSTalliNg The SeNSOr ................................... 15
5.2 lOfa cONTrOl PrOgraMMiNg ........................ 15
service & mainTenance ....................................... 17
6.1 SharPeNiNg chiPPer BladeS ........................ 17
6.2 SeTTiNg Blade clearaNce ............................. 17
6.2 SeTTiNg Blade clearaNce (cONT.) ............... 18
6.3 adJuSTiNg/rePlaciNg drive BelT .................. 18
6.4 cleariNg Plugged rOTOr ............................. 18
6.5 greaSeaBle BeariNgS..................................... 18
6.6 rePlaciNg BeariNgS ........................................ 18
6.7 Service aNd MaiNTeNaNce Schedule ........ 19
TroublesHooTing ................................................. 20
7.1 geNeral TrOuBleShOOTiNg .......................... 20
7.2 hydrOSTaTic PuMP TrOuBleShOOTiNg ....... 21
sPeciFicaTions ........................................................ 22
8.1 chiPPer SPecificaTiONS ................................... 22
8.2 BOlT TOrQue ........................................................ 23