Echo 71854 - Manual (Page 9)

PTO CHIPPERS 7
SAFETY
Pn 12169
3
KeeP haNdS aNd feeT
OuT Of iNleT aNd
diScharge OPeNiNgS While
MachiNe iS OPeraTiNg TO
avOid SeriOuS PerSONal
iNJury. allOW MachiNe TO
cOMe TO a cOMPleTe STOP
BefOre cleariNg OBSTruc-
TiONS.
Pn 12172
4
read aNd uNderSTaNd
ThiS OWNer/OPeraTOrS
MaNual. Be cOMPleTely
faMiliar WiTh The cON-
TrOlS aNd The PrOPer
uSe Of ThiS eQuiPMeNT.
OBTaiN aNd Wear SafeTy
glaSSeS aNd uSe hear-
iNg PrOTecTiON aT all
TiMeS WheN OPeraTiNg
ThiS MachiNe.
BefOre iNSPecTiNg Or
ServiciNg aNy ParT Of
ThiS MachiNe, ShuT Off
POWer SOurce, diScON-
NecT SParK Plug Wire
frOM SParK Plug aNd
MaKe Sure all MOviNg
ParTS have cOMe TO a
cOMPleTe STOP.
Pn 12173
5
dO NOT OPeraTe ThiS eQuiP-
MeNT iN The viciNiTy Of By-
STaNderS. dO NOT allOW
childreN TO OPeraTe ThiS
eQuiPMeNT. alWayS STaNd
clear Of diScharge area
WheN OPeraTiNg ThiS Ma-
chiNe. KeeP face aNd BOdy
aWay frOM diScharge areaS.
Pn 12174
6
dO NOT OPeraTe MachiNe
WiThOuT ShieldS iN Place.
failure TO dO SO May cauSe
SeriOuS iNJury Or deaTh.
Pn 12175
7
KeeP haNdS aNd feeT OuT
Of iNleT aNd diScharge
OPeNiNgS While MachiNe iS
OPeraTiNg TO avOid Seri-
OuS PerSONal iNJury. al-
lOW MachiNe TO cOMe TO
a cOMPleTe STOP BefOre
cleariNg OBSTrucTiONS.
Pn 12168
2
KeeP haNdS, feeT aNd BOdy
aWay frOM driveShafT
While MachiNe iS OPeraT-
iNg TO avOid eNTaNgle-
MeNT. OPeraTe MachiNe aT
540 rPM.
read aNd uNderSTaNd
ThiS OWNer/OPeraTOrS
MaNual. Be cOMPleTely
faMiliar WiTh The
cONTrOlS aNd The
PrOPer uSe Of ThiS
eQuiPMeNT.
Pn 13711-00
1
Pn 12250
8
checK Blade BOlTS fOr
PrOPer TOrQue afTer ev-
ery 8 hOurS Of OPeraTiON.
checK BladeS aNd rOTaTe
Or reSharPeN daily Or aS
reQuired TO KeeP BladeS
SharP. refer TO OWNerS
MaNual fOr iNSTrucTiONS.
failure TO dO SO May cauSe
POOr PerfOrMaNce, daMage
Or PerSONal iNJury aNd Will
vOid The MachiNe WarraNTy.
1.8 saFeTY decals
9
feed rOller SuPPOrT
MuST Be Secured iN
The uP POSiTiON PriOr
TO ServiciNg chiPPer
feed area. The feed
rOller caN fall aNd
cauSe Severe BOdily
harM. cONSulT OWN-
erS MaNual fOr PrOP-
er MeThOd Of SecuriNg feed rOller SuPPOrT. lOWer
feed rOller BefOre OPeraTiNg chiPPer.
Pn 18983-00
models 72854/s and 76854/s onlY