Echo CH911DH Owners Manual v.4 - Manual (Page 9)

9 INCH CHIPPER 5
englis
H
SAFETY
FEED ROLLER SUPPORT
MuST BE SECuRED IN THE
UP POSITION PRIOR TO
SERVICINg CHIPPER FEED
AREA. FEED ROLLER CAN
FALL AND CAUSE SEVERE
BODIly HARM. CONSulT OWNERS MANuAl FOR PROPER
METHOD OF SECuRINg FEED ROllER SuPPORT. lOWER
FEED ROllER BEFORE OPERATINg CHIPPER.
1.10 safeTY DeCals
Pn 12169
2
1
kEEP HANDS AND FEET
OUT OF INLET AND
DISCHARgE OPENINgS WHIlE MA-
CHINE IS OPERATINg TO AVOID SE-
RIOUS PERSONAL INJURY. ALLOW
MACHINE TO COME TO A COMPlETE
STOP BEFORE ClEARINg OBSTRuC-
TIONS.
Pn 12172
3
READ AND UNDERSTAND
THIS OWNER/OPERATORS
MANUAL. BE COMPLETELY
FAMIlIAR WITH THE CON-
TROlS AND THE PROPER
uSE OF THIS EQuIPMENT
OBTAIN AND WEAR SAFETY
glASSES AND uSE HEARINg
PROTECTION AT ALL TIMES
WHEN OPERATINg THIS MA-
CHINE.
BEFORE INSPECTINg OR
SERVICINg ANy PART OF THIS
MACHINE, SHuT OFF POWER
SOURCE AND MAKE SURE ALL
MOVINg PARTS HAVE COME
TO A COMPLETE STOP.
Pn 12173
4
DO NOT OPERATE THIS
EQuIPMENT IN THE VICIN-
ITY OF BYSTANDERS. DO
NOT AllOW CHIlDREN TO
OPERATE THIS EQuIPMENT.
ALWAYS STAND CLEAR OF
DISCHARgE AREA WHEN
OPERATINg THIS MACHINE. kEEP FACE AND BODy AWAy
FROM DISCHARgE AREAS.
Pn 12174
5
DO NOT OPERATE MACHINE
WITHOuT SHIElDS IN PlACE.
FAILURE TO DO SO MAY CAUSE
SERIOuS INJuRy OR DEATH.
PN 12174
Pn 12175
6
kEEP HANDS AND FEET OuT
OF INlET AND DISCHARgE
OPENINgS WHIlE MACHINE
IS OPERATINg TO AVOID SE-
RIOUS PERSONAL INJURY.
AllOW MACHINE TO COME TO A COMPlETE STOP BEFORE
ClEARINg OBSTRuCTIONS.
Pn 12250
7
CHECk BlADE BOlTS FOR
PROPER TORQUE AFTER
EVERy 8 HOuRS OF OPERA-
TION. CHECk BlADES AND
ROTATE OR RESHARPEN
DAILY OR AS REQUIRED TO
kEEP BlADES SHARP. REFER TO OWNERS MANuAl FOR
INSTRUCTIONS. FAILURE TO DO SO MAY CAUSE POOR
PERFORMANCE, DAMAgE OR PERSONAl INJuRy AND
WIll VOID THE MACHINE WARRANTy.
Pn 14942-00
Pn 12183
8
PRESS CluTCH PEDAl DOWN
WITH FOOT TO DISENgAgE
BElT WHIlE STARTINg EN-
gINE. SlOWly RElEASE FOOT
TO ENgAgE CHIPPER BElT
AFTER CHIPPER IS RuNNINg.
Pn 18983-00 9
See Section 1.9 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.