Echo EA-410 - Manual (Page 19)

EA-410 OPERATION
© 10/2013 ECHO Inc.
X7504220703 19
2. Purge Bulb
Pump purge bulb (E) until fuel is visible in the “Clear” fuel
return line.
3. Decompression Button
Press decompression button (D) once.
4. Recoil Starter
Lay the unit on a flat, clear area, and pull the recoil starter
handle (A) until the engine fires.
Note: If engine does not start after 5 pulls, use Cold Start Procedure.
Stopping Engine
1. Throttle
Allow engine to return to idle before shutting off engine.
2. Stop Switch
Move stop switch button (B) backward to “STOP” position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall
engine. Have your ECHO dealer repair stop switch before
using unit again.
E C
D
B