Beltronics V990 - Manual (Page 18)

• SWS ™ feature and SWS ™ Voice/Tone do not appear since
the SWS ™ feature is not available in Europe.
• AccuSweep ™ is replaced with 3 individual Ka Narrow
frequencies which you can choose ON or OFF, depending
upon driving environment.
Entering Selectable Features Mode
1. With the unit OFF, press and hold the PWR and CTY
buttons simultaneously. The word “ F FE EA AT TU UR RE ES S ” will appear
in the display, followed by the status of the first
Selectable Feature.
2. Press the CTY button to move to the next Selectable
Feature. To move backward in the list, press the DRK
button.
3. Press the AUD button to make your selection.
4. Press the PWR button to exit Selectable Features mode.
To confirm your unit is ready for operation, and what
mode of travel your unit is operating, the display will
read: “
A Auu tt oo S S cc aa nn ”, “ H Hii gg hh ww aa yy ”, “ C Cii tt yy X X ” or C Cii tt yy A AL LL L .
Installation
General Guidelines
Do not mount your unit directly behind windshield
wipers or mirrored sunscreens which block Radar and
Laser signals and substantially reduce warning range.
Unlike “after market” mirrored sun-screens, regular
tinted glass does not affect Radar reception. Radar
signals are also reflected by “heated windshields” known
as Instaclear
® and ElectriClear ® available as an option on
some vehicles. This type of windshield makes any dash,
visor or windshield mounted detector ineffective.
(If in doubt, check with an appropriate dealership to
see if this applies to your vehicle.)
16
k
k
Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.