2N Omega Series - VoIP manual v1.2 - Manual (Page 66)

2N
®
- OMEGA Lite
Ethernet module
User Manual – Ethernet Module
66
www.2n.cz
The VoIP lines have to be bundled (trunked) for outgoing calls. In the factory
setting, the VoIP lines are automatically included in trunk 6 and all internal lines
may seize the trunk using the Seizure of external line trunk (dialling 86).
Include the VoIP lines into the LCR for comfortable calling.
5.5. Incoming Ringing
The behaviour of the VoIP module is the same as that of the ISDN BRI
module with the DDI function in the inward direction. Unless specified in the module
setting, define the count of digits to be removed from the incoming identification,
the remaining digits being considered as the dial-in. Then, the DID is used for the
PBX subscriber according to the DID numbering plan:
Or, the DID ringing table is used as the case is with the ISDN dial-in.