2N Omega Series - VoIP manual v1.2 - Manual (Page 75)

2N
®
- OMEGA Lite
Ethernet module
User Manual – Ethernet Module
75
www.2n.cz
Push Setup to set the PBX module parameters.
6.1.5.1. Trace
Enable/set the following:
•
Trace – enable the creation of the PBX module LOG communication.
•
Erase trace at start – enable the deletion of the PBX module LOG
communication upon the XAPI server start.
•
File size limit – limit the LOG file size (*.trc). When the limit is exceeded, the
oldest data are overwritten.
6.1.5.2. Number Conversion