A2Z Ozone Bed Sterilizer - Manual (Page 3)

3
Learn about the machine before use
Before installation
In use
 Forbid placing the Bed Sterilizer upside down or
horizontally during transport.
 Use 220V AC power. Add stabilizing devices before use
if the instability of power voltage exceeds ±10%.
 Insert the plugs of power cords into safe and qualified
sockets solidly. Choose the products passing safe electric
certification if extended wiring board is needed.
 The Bed Sterilizer should be used under the environmental
temperature of 5～40℃, relative humidity≥60% . The
temperature lower than 5℃ may result in difficult starting
and that over 40℃ may cause overheated operation of the
equipment and lower its life.
 Tie the sealed bag well and make sure that the hose and
nozzle are connected well to prevent ozone leakage
problems.
 Don’t open the sealed bag once the procedure is completed;
keep it sealed for 30 minutes.
 The inner structure has high voltage and high frequency, It
is forbid to open it by users. Any questions, please contact
manufacturer or agency.
 It should be away from heat source or naked fire and not be
placed in humid, high-temperature.