AiM MXL Dash - Manual (Page 5)

How To install and connect MXL Dash to EVO4.
MXL Dash has to be connected via CAN bus
to your EVO4, whose firmware version
should be 43.03.17 or following. Connection is via CAN cable, that you find
in the kit: just plug the connector into the
“EXP” EVO4 port.
CHAPTER 1 INSTALLATION AND CONNECTION MXL DASH
08 09
MXL DASH
Speed 1-2
Beacon
ECU - CAN RS232
Exp. RPM K/L line
GPS Antenna Analog Input Channel
USB
Status EVO4
2 1
CAN - Power Connection