How to configure mxl dash – AiM MXL Dash User Manual
Page 7
CHAPTER 2
CONFIGURATION OF MXL DASH
12
13
How to configure MXL Dash.
MXL DASH
Note: The RPM scale is configurable: the end of scale depends upon the EVO4 configuration.
MXL Dash receives its configuration
parameters from EVO4.
So, you are supposed to configure EVO4 in
order to make MXL Dash properly working.
Select, therefore, in EVO4 configuration,
MXL Dash as a display.
1
2
You will see the MXL Dash image appearing.
and you have to define:
The RPM thresholds to activate the Flash
Gear LEDs.
The channels displayed in the two pages of
the dash.
By pressing "Transmit" pushbutton all
configuration parameters are sent to EVO4
MXL Dash.
3
The related short names to be displayed.
The channels associated with the alarm
Leds, as well as the threshold values to
which turn on the Leds themselves.
Any message that may appear at power on.