AiM MyChron3 Basic - Manual (Page 32)

32
When a test is complete, the system displays the last lap number and last lap
time. Using button MEM you can access the data stored in system’s memory.
Here’s how to retrieve data after the completion of a test:
Viewing data
per best lap
time
To view the data for the lap with the best lap time, press MEM
while in general display mode. The best lap time is displayed
for the most recent test.
The system displays the test number, lap number, maximum
temperature for the lap and the lap time. The lap time will be
flashing, signaling that this is the best lap time for the test.
If MEM is pressed a second time, it will show the minimum
temperature and RPM values for the lap with the best time.
To return to general display mode, press VIEW.
View other
completed lap
data
To view completed lap data, while in general display mode,
press MEM to view the best lap time. Then press MENU/<< to
view a previous lap or >> for a following lap. If you have
configured the MyChron 3 to capture splits, MENU/<< and >>
will also scroll through the split times within each lap.
Pressing MEM will display the minimum RPM and
temperature values for the current lap.
To retrieve previous test data ( when more than one test has
been recorded ) press MENU/<< until the required test and lap
details ( or split details ) appear on the display.
To increase scrolling speed through recorded laps hold down
MENU/<< and >>.