AiM SmartyCam GP HD ver 1.00 User Manual
Page 23
The VIDeO CAMerA
23
SMArTYCAM hD
n Automatic recording
• In slave mode (SmartyCam HD connec-
ted to an AiM logger).
The logger transmits a ‘Start Recording’ si-
gnal to SmartyCam HD as soon as it starts
recording the data.
This generally happens when it detects rpm
or a speed higher than 10 km/h.
The logger transmits a ‘Stop Recording’
signal when it stops recording data.
This generally happens when the speed
goes under 10 km/h, or when RPM turn
Off.
• After receiving the ‘Stop Recording’ signal,
SmartyCam HD continues recording for a
period from five seconds to five minutes.
To configure this setting, select:
MeNU>>SeTTINGS>>AUTO STOp reC
• In stand alone mode (SmartyCam HD not
connected to any AiM logger).
SmartyCam HD can start and stop the
video recording automatically, depending
upon the accelerations it detects.
To enable the Automatic Start/Stop mode,
select:
MeNU>>SeTTINGS>>AUTO STArT reC
And select the acceleration threshold value
at which recording starts. You have three
possibilities:
Low acceleration (0.2 G)
Medium (0.4 G)
High (0.8 G).
• When SmartyCam HD does not detect ac-
celeration, it will stop recording after the
delay (from five seconds to five minutes)
set by selecting:
MeNU>>SeTTINGS>>AUTO STOp reC
SMARTYCAM HD MANUALE ENG _Layout 1 24/07/13 20.41 Pagina 24